DMC has added two new sizes to the lineup of the DUS-N series. The new sizes 15.6W (DUS-N156WA060A) and 21.5W (DUS-N215WA060A) are an addittion to the two previously released sizes, 8.4”and 15”. The DUS-N series has a narrow frame with its internal wiring space minimized. It can be used for products with slim bezels or…
WL0F00101000JGDAASA00 is a 10.1-inch TFT Smart Display_RS485 series from Winstar, defined as a slave device controlled by a master device via RS485 command to render display content on the display screen and return touch event data with Modbus protocol data. WL0F00101000JGDAASA00 features Winstar wide temperature IPS TFT WF101JTYAHLNB0 and a 4-layers FR4 PCBA built-in firmware.…
DMC announces the release of a new PCAP product “DUS-N” series, available from September 1st 2022. The DUS-N series has a narrow frame with its internal wiring space minimized. It can be used for products with a slim bezels or those that require compact embedded. The Glass-glass structure touchscreen is suitable for industrial use. Compared…
Winstar 5″ PCAP IPS TFT for HDMI Signal Winstar WF50FSYFGDHGV is an IPS 5 inch High Brightness 800×480 TFT-LCD module with Capacitive Touch Panel (PCAP). WF50FSYFGDHGV comes with a control board which only supports Raspberry PI system HDMI Signal interface (only DVI). There is a 40-pin GPIO connector on the control board which is designed…
DMC will extend the specification values of operating temperature range (low-side) for “DUS-A series” PCAP touch screens and “DUSx200 series” PCAP controllers. Operating Temperature PCAP touch screen “DUS-A Series” (7 to 32inch) Before After -20°C to 80°C (no condensation) -40°C to 80°C (no condensation) PCAP Controller “DUSx200 Series” Before After -20°C to 85°C (no…
This time we are introducing the DMC DFS series, not the conventional products, but the new models DFS series. They are DMC’s newly developed PCAP sensors compatible with EETI’s and ILITEK’s controllers that are popular both in the Europe and North America. In particular, the models ranging from 15inch to 21.5inch W achieved 1.25mm in…
In recent months, two major players in the market have announced that they are ending their display activities. 3M will immediately discontinue the SCT (Surface Capacitive Touch) and PCAP (Projective Capacitive Touch) product lines. The last shipments are to be completed by the end of March 2021. Mitsubishi Electric Corporation will finish production of TFT-LCD…
DLC optimizes the integrated HDMI Board Display Module for PCAP touch screens The HDMI Board Display Module is equipped with both an HDMI interface as well as a USB connection. The HDMI interface will be used for the TFT Display and the HDMI interface for connecting the Projected capacitive touch (PCAP) / Projected capacitive touch…
The Winstar WEO128128D-CTP is an Ø1.18″ circular graphic OLED display; with capacitive touch screen on module; made of resolution 128×128 dots. This module is built in with SSD1327 IC, it supports 4-line SPI and I2C interface, supply voltage for logic 3V (typical value), 1/128 driving duty. This WEO128128D-CTP model is built in with IT7259 touch…
On April 15, 2020, DMC released the new Glass/Glass projected capacitive touch screen “DFS series”. The DFS series is a touchscreen developed to use the EETI or ILITEK controller, which is popular in the world market. It is designed according to any design policy, so that customers are easily supported. For the DFS series DMC…