Geplaatst op

Winstar OLED Circuit Built-in Solution—WEA Series

Winstar released a series of OLED Circuit Built-in Solution display modules – OLED WEA Series. The OLED WEA Series are our COG extension items featuring power circuit built-in on board and reserved standard 2.54 mm pin holes on PCB board to provide another easy connecting function. The PCB board with mounting holes is an easy…

Read more

Geplaatst op

Winstar introduces 3.12″ COF OLED (PCB+Frame) with CTP Touch

The Winstar WEN025664B-CTP model is a COF Graphic OLED with Capacitive Touch, diagonal size 3.12 inch, made of resolution 256×64 dots. This OLED module is built-in with SSD1322 COF IC; it supports 6800/8080 8-bit parallel, and 4-Wire SPI interface, supports 16 (4-bits) gray scale, supply voltage for logic 3V, the display with 50% Check board…

Read more

Geplaatst op

Winstar introduces 2.7″ Touch OLED with PCB & Frame

Winstar WEP012864Q-CTP model is a COG Graphic OLED with Capacitive Touch Panel, diagonal size 2.7 inch, made of 128x64pixels. This OLED module is built-in with SSD1309 IC; it supports 6800/8080 8-bit parallel, I2C, and 4-Wire SPI interface, supply voltage for logic 3V, the display with 50% Check board current is 175mA @3.0V VDD (typical value),…

Read more

Geplaatst op

Winstar 4.3″ HDMI Signal High Brightness IPS TFT

Winstar WF43WSYFEDHNV is an IPS 4.3 inch High Brightness TFT-LCD module; it’s made of resolution 480×272 pixels. WF43WSYFEDHNV comes with a control board which supports HDMI signal (Only DVI) interface and having a 40-pin GPIO connector on the board; it is designed to make Raspberry Pi usage become easily. The control board on module is…

Read more

Geplaatst op

Winstar 3.2″ High Brightness Portrait TFT

The Winstar WF32DSLAJDNN0 is a 3.2 inch portrait mode TFT LCD module, made of resolution 240×320 pixels. This module is built in with ILI9341 driver IC, it supports 8080 MCU 8bit /9bit/16bit/18bit/ SPI (3 Wire/4 Wire) interface. WF32DSLAJDNN0 is a high brightness TFT-LCD module, typical value 1000 nits, contrast ratio 500:1 (typical value), view direction…

Read more

Geplaatst op

Smart Display GUI Builder Introduction

Winstar developed a Windows IDE (Integrated Development Environment) for Smart Display GUI design. There are many important key advantages for Winstar GUI Builder software as below: ► Drag-and-drop Widget Preview Function: Winstar GUI Builder software is designed for customers to simulate their GUI designs in advance by using the drag-and-drop Widget preview function; furthermore, customers…

Read more

Geplaatst op

Winstar 3.9″ Smart Display CAN Series TFT

Winstar WL0F00039000QGAAASA00 is a 3.9″ Smart Display CAN series TFT which is defined as a slave device, that is controlled by master device via CAN bus command to render display content on the display screen and return touch event data with protocol objects. WL0F00039000QGAAASA00 is integrated with a standard 3.9 inch Bar TFT module WF39QTIBSDBG0…

Read more

Geplaatst op

3.12″ COF Graphic OLED WEX025664B with PCB

The Winstar WEX025664B-PCB model is a COF type Graphic OLED with PCB on module; it’s diagonal size 3.12 inch, made of 256×64 pixels. This PCB board with four mounting holes is an easy method for customers to fix modules on their applications. Furthermore, the integration of interface setting with VCC circuit on PCB board makes…

Read more