Posted on

RECOM RPY-1.5Q Automotive Qualified LED Driver with “Wettable Flanks”

The low-cost, high-efficiency, RPY-1.5Q AEC-Q100 automotive-qualified LED driver from RECOM is now available in a thermally-enhanced QFN package with an integrated shielded inductor and optional ‘wettable flanks’. This feature allows Automated Optical Inspection (AOI) of solder joints, as demanded by automotive customers, avoiding the need for costly and slow X-ray inspection. The product is just…

Read more

Posted on

RECOM launches compact Plug & Play Converter for E-Mobility

RECOM has launched their cost-effective RMOD500-W range of compact, plug-and-play DC/DC converters for off-highway E-mobility applications. Delivering 500W output, the fully-enclosed, chassis-mounted parts are available with IP67 rating and feature an input range of 32-96V, suitable for nominal 48V, 60V, 72V and 80V battery supplies. Outputs available are 13.7V, 13V, 12.4V, 11.7V, 24.5V and 23.5V,…

Read more

Posted on

Recom 20W AC/DCs in 2 x 1 inch format are OVC III

OVC III, power-dense AC/DC modules feature wide input range and high isolation. RECOM has added a 20W part to its ‘E-K’ range of encapsulated, PCB-mount AC/DC modules, the RAC20E-K/277. Even though it is economically designed, the series is dimensionally of the same size as the existing 20W at just 52.7mm x 27.6mm footprint, but with…

Read more

Posted on

RECOM announces a high-efficiency baseplate-cooled 500W DC/DC for rail applications.

Recom 500W Railway Compliant DC/DC is ‘Plug and Play’ The latest addition to RECOM’s railway portfolio is the RMD500-EW series. Featuring 500W rating with a wide 4:1 (43-154VDC) input range (170V peak) and 24V output, the product is suitable for nominal 72V and 110VDC inputs with tolerance and surges according to EN 50155. The RMD500-EW…

Read more

Posted on

Recom DC/DC converters designed for gate drive power

The new RA3 range of DC/DC converters is available from RECOM, designed to power IGBT, Si, SiC and GaN gate drivers. RECOM has added to its range of low-cost, unregulated DC/DC converters with the RA3 series of 3W SMD parts which are designed to provide the optimum voltages for semiconductor switch gate drivers. Variants are…

Read more

Posted on

Highly efficient wide-input DC/DCs in 1/32nd bricks

RECOM adds cost-effective 4.5A and 8A buck converters to product range. RECOM now offers through-hole, 1/32nd brick-footprint, non-isolated DC/DCs – the RPMA-4.5 and RPMA-8.0, with 4.5A and 8A output ratings respectively. Each part has a wide 9-53V input and trimmable, fully regulated output from 5-30V (RPMA-4.5) or 3.3-16.5V (RPMA-8.0). The cost-effective parts feature very high…

Read more

Posted on

Board-mount 5W AC/DC for harsh environments introduced by RECOM

5W AC/DC is OVC III and PD3-rated The RAC05-K/PD3/H from RECOM is a board-mounted 5W Class II AC/DC converter series, intended for ‘fixed installations’ where higher levels of transients according to over-voltage category III are experienced, along with increased environmental pollution levels. The converters are available with 5V, 12V or 15V single outputs and include…

Read more

Posted on

RECOM announces the RPA150Q ultra-wide input 150W DC/DC series in a quarter-brick format.

16:1 input DC/DC is Ideal for Rail Applications RECOM is launching its 16:1 ultra-wide input high-isolation quarter-brick DC/DC converter, ideal for rail and harsh industrial applications. Input range of the RPA150Q series is 14.4V to 170V (200V for 1s), and fully regulated available outputs are 12, 24, or 54VDC with wide +10/-20% trim range (+18/-20%…

Read more

Posted on

Cost-efficient, regulated SIP8 DC/DC converters are fully featured

RECOM announces the launch of a range of regulated SIP8 DC/DC converters with high power density and industrial temperature range.  RECOM, industry leader in power conversion, has announced the launch of the RS3E family of DC/DC converters in an industry-standard SIP8 format and pin-out. The parts are rated at 3W with no derating to 70°C…

Read more