Winstar introduces the 0.68 Inch Graphic OLED WEO009632B Hotbar Version and the 0.95 Inch Graphic OLED WEO009664A.
0.68 Inch Graphic OLED WEO009632B Hotbar Version
The WEO009632B-Hotbar version is a mini OLED display which is made of 96×32 resolution, diagonal size 0.68 inch. WEO009632B-Hotbar is built in with SSD1305 driver IC; it supports 6800/8080 8-bit parallel, I2C and 4-wire SPI interface. The supply voltage for logic of WEO009632B-Hotbar version is 3V, 1/32 driving duty; display with 50% check board current is 6mA@12Vcc (typical value).
This OLED display which is ultra thin and no need of backlight; it’s lightweight and low power consumption. It is suitable for portable device, personal care appliance, health device, meter device, etc. WEO009632B-Hotbar module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.
0.95 Inch Graphic OLED WEO009664A
The WEO009664A is a small OLED display which is made of resolution 96×64 pixels, diagonal size 0.95 inch. This Passive Matrix OLED is built in with SSD1305 IC; it can communicate via 6800/8080 8-bit parallel, I2C, SPI interface. The supply voltage for logic of WEO009664A is 3V, 1/64 driving duty; display with 50% check board current is 6mA@12Vcc (typical value). It can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.
The visible portion of the OLED measures 0.95″ diagonal and contains OLED 96×64 pixels is very suitable for portable device since it is much brighter, much higher contrast, wider viewing angle and lower current consumption than conventional LCD. WEO009664A COG OLED displays are ultra thin, lightweight and low power consumption which is great for handheld device, meters, smart grid, IoT, etc.
|
|
For more information please contact Nijkerk Electronics