Winstar 4.3″ HDMI Signal High Brightness IPS TFT

Winstar WF43WSYFEDHNV is an IPS 4.3 inch High Brightness TFT-LCD module; it’s made of resolution 480×272 pixels. WF43WSYFEDHNV comes with a control board which supports HDMI signal (Only DVI) interface and having a 40-pin GPIO connector on the board; it is designed to make Raspberry Pi usage become easily. The control board on module is featured with four mounting holes which is an easy method for customers to fix modules on their applications. WF43W HDMI series also supports PWM (Pulse Width Modulation) function for adjusting LED backlight brightness.

WF43WSYFEDHNV is adopted IPS panel which has a wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical value). This TFT model is built in with TFP401 controller IC, it supports HDMI signal (only for DVI) interface, brightness 1000 nits (typical value). We also offer Resistive Touch Panels (RTP) and Projected Capacitive Touch Panel (PCAP) optional for WF43W HDMI signal series, available part no. WF43WSYFEDHTV(RTP) and WF43WSYFEDHGV(PCAP).

The supply voltage for LCM (VDD) of WF43WSYFEDHNV is 5V, glare surface glass, aspect ratio 16:9, contrast ratio 800:1 (typical value). It can be operating at temperatures from -20℃ to +70℃ and storage temperatures from -30℃ to +80℃.




4.3 inch

Dot Matrix

480 x RGBx272(TFT)

Module dimension

105.5(W) x 84.2(H) x 22.13(D)mm

Active area

95.04 x 53.856 mm

Pixel pitch

0.198 x 0.198 mm

LCD type

TFT, Normally Black, Transmissive

Viewing Angle


Aspect Ratio


Controller IC



HDMI (only for DVI) signal

Backlight Type

LED, Normally White

Touch Panel

PCAP/RTP optional





Are you looking for a display soluition? Visit the Nijkerk Electronics online catalogue and find your solution.

For questions contact Nijkerk Electronics.

See all posts