Winstar believes that OLED is the display technology for the future. OLED is self emitting and required no backlight which made it very thin and low power consumption and creates less CO2 emissions.
Winstar just introduced three new 2.08” COG OLED Models
2.08″ COG OLED WEO025664A with ZIF FPC Version
The WEO025664A-ZIF is a COG structure OLED module which is ultra thin 1.61 mm; lightweight and low power consumption. It is suitable for smart home application, meter device, personal care appliance, health device, etc.
2.08″ COG OLED WEO025664A with Hotbar Version
The WEO025664A-Hotbar version is directly solder flex tail for super-thin profile. This COG structure OLED module is ultra thin 1.61 mm; lightweight and low power consumption. It is suitable for smart home application, meter device, personal care appliance, health device, etc. Winstar provides ZIF
2.08″ COG OLED WEA025664A with PCB Board
The WEA025664A is a graphic COG with PCB OLED display model, WEA025664A is built in with SSD1362 driver IC; it supports 4-Wire SPI interface, 4 bits grayscale image, 1/64 duty cycle. WEA025664A model is having PCB outline size 70.0 x 22.0 mm with mounting holes on board and 7×1 metal pins on module. WEA025664A is supported by 3V ~5V, within DC-DC conversion circuit, display with 50% check board current is 90mA@3Vdd (typical value), 1/64 duty cycle.
Check the details of the models below:
For more info contact Nijkerk Electronics