Winstar 3.55“ 256×64 OLED CAN Bus Smart Display

WLEP02566400DGAAASA00 model from Winstar is a 3.55-inch Smart Display CAN series OLED display that is running CANopen protocol via CAN bus command to render display content on the screen and return touch event data with protocol objects. This 3.55″ OLED Smart Display CAN series is an easy-to-use product that allows customers to create their UI without writing a line of code cost-effectively. This model is integrated with a standard 256×64 pixel touch OLED module and a 4-layers PCBA with built-in firmware code developed by the Winstar RD team.

Winstar already developed Windows Apps (GUI & GUI Builder) for Smart Display GUI design. This 3.55″ Smart OLED Display can use a computer with USB2CAN dongle or Raspberry Pi (+PiCAN2) or even an MCU scale like Arduino (+CAN adaptor) as a HOST platform. Winstar GUI builder software is designed for customers to simulate their UI design in advance using the drag-and-drop Widget preview function. Furthermore, customers can create their ideal UI objects using this software and then go through simulation to check UI design without hardware module. Winstar GUI builder software only supports the Windows system; it can fulfill What You See Is What You Get (WYSIWYG).

Winstar Smart Display CAN Series offers an out-of-the-box CANopen development experience that will lower your development costs and speed up your time-to-market expectations. The CanOLED comes with standard UI objects to quickly get customers’ projects off the ground.

There are many essential features and functions for this newly released SmartDisplay OLED 3.55″, an OLED type display with 256×64 resolution as below:

  • DC 5V working voltage
  • Power-On Self-Test & Splash screen
  • CAN bus Interface
  • Supports CANopen protocol, default baud rate at 250KB
  • Built-in flash memory, store the font and Object Dictionary Data
  • Supports PCAP touch screen

Can Smart Display is defined as a slave device, which is controlled by the master device via CAN bus command to render display content on the display screen and return touch event data with protocol objects. Built-in Buzzer is controlled by the master device.

It is possible to design the UI without writing a line of code. This is done by the Winstar GUI builder.

Mechanical Data

Item

Standard Value

Unit

OLED panel

100.4(W) x 36.1(H) x 3.39(D)

mm

PCB

157.0(W) x 40.0(H) x 1.6(D)

mm

Housing outline

157.0(W) x 40.0(H) x 11.45(D)

mm

General information

Item

Standard Value

Unit

Operating voltage

5

Vdc

Communication Interface

CAN bus differential ± 3.3

Vpp

MCU

STM32F750

NA

Flash Memory

16

MB

SDRAM Frequency

108

MHz

Size

3.55

inch

Dot Matrix

256 x 64

pixel

Module dimension

107(W)*68.7(H)*27(D)

mm

Active area

95.04 x 53.856

mm

Dot pitch

0.342 x 0.333

mm

LCD type

OLED, White color, Passive Matrix

Drive Duty

1/64 Duty

Gray Scale

4 bits

With /Without TP

With CTP

Surface

Glare

If you want more information or if you have any questions about this product, please contact Nijkerk Electronics!