Radial Lead Type Supercapacitors from Nippon Chemi-Con – 3.0V Withstand Voltage

Nippon Chemi-Con has newly developed radial lead type supercapacitors DKH Series with improved withstand voltage and heat resistance. This is an addition to the existing DKA Series and DKG Series which have been used in backup automotive power supplies.

The DKH Series can withstand a rated voltage of 3.0V(1) and realizes a higher heat resistance of 85°C(2) and smaller size(3).

  1. When used at specified temperature 65°C
  2. When used at rated voltage 2.6V
  3. 20% smaller than DKA Series, equal to DKG Series

The higher withstand voltage increases the energy amount of each cell and achieves downsizing and weight reduction of systems through the reduction of total installed capacitors.
Main applications are backup power supplies for automotive electronics in emergencies. The Series will contribute to the optimization of equipment design for electric door locks, shift-by-wires, EPS (electric power steering) and dashboard cameras.
Nippon Chemi-Con will continue using liquid electrolyte that does not contain acetonitrile (AN) solvent, which may produce cyanide gas.
Nippon Chemi-Con has also achieved the world’s first 2,000-hour guarantee at 3.2V50°C for radial lead type supercapacitors. (*Based on research by Nippon Chemi-Con, March 2022)

 

Main Specifications

  • Category temperature range: -20°C to +85°C
  • Rated voltage: 3.0V
  • Capacitance: 50F
  • Internal resistance: 29mΩ
  • Case size: ⌀18mm×40mmL
  • Endurance: 2,000 hours at 3.2V50°C, 3.0V65°C, 2.6V85°C

Samples and Mass Production

Samples: May 2022

Mass production: December 2023

Production Site

Chemi-Con Yamagata Corp. Yonezawa Plant

If you want more information or if you have any questions, please contact Nijkerk Electronics!

 

 

 

Tous les articles